Start Service "Simple TCP/IP Service" (enables ports 7 & 9) Open Programs and Features from the Control Panel, click "Turn Windows features on or off" on the sidebar, scroll down and check "Simple TCPIP services", then click OK to install the feature. Install Windows Feature "Simple TCPIP services" Mentioned in some sources, but possibly unneeded: Or its matching Graphical Interface found here. Many such are available on the Internet, by command line like wolcmd UDP is a broadcast packet which can always be received by your NIC, whereas TCP requires the computer to be powered up. Only UDP is needed, but you can if you wish open the TCP port as well. Open Windows Firewall from Control Panel. Right-click and open Properties then go to the Advanced tab andĮnable "Wake on Magic Packet" or something similar. Open Device Manager from the Control Panel, expand Network Adapters and find your Ethernet Card. However, if no such option is found in the BIOS, it might be safe to assume that it will work by default. The actual method depends on your motherboard. Your OS must be configured to enable Wake-on-LAN.Your router must be configured to forward broadcast packets.Your power supply must support Wake-on-LAN.Your network card must support Wake-on-LAN. The first step is to check the hardware : You will need to first use Wake-On-Lan to wake up the sleeping computer, Remote Desktop does not have any built-in remote wake-up capability.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |